This study takes into consideration the material of the cathode "bolt," the thickness of the electrolyte "e," the dimensions of the bolt head, and the distance from the contact area between the head bolt and the
end plate in order to determine the parameters which can cause the maximum corrosion rate of the anode "
end plate."
Simdes da Silva, "Experimental assessment of the ductility of extended
end plate connections," Engineering Structures, vol.
Replacing the factory slide
end plate of the pistol with the TA-1 makes racking the slide easier, something a new shooter or someone with a weak hand would surely appreciate.
He covers the design and analysis for smart partially restrained concrete-filled tube connections, both
end plate and T-stub types; for bolted connections, including component models for recentering bolted connections; and for gusset plate, recentering slit damper and smart damping smart connections.
The decking comes in six different styles for easy drop-in installation: with or without an angle collar to rest on step beams; with or without an
end plate to rest on top of box or structural beams; with an angle collar to rest on top of box or structural beams; and with a waterfall
end plate for use with step beams.
Radiographic findings revealed lumbar disc degeneration with posterior
end plate lesions at L4/5 and L5/S1 (Figure 1).
The rubber sleeve is secured to the
end plate through a series of wedging points for a strong and safe attachment.
The popularity of bolted
end plate connection is largely due to its simplicity in fabrication and installation.
Also offered in a galvanized finish, the pallet rack decking comes in four deck styles: on a step beam with or without an angle collar, or on top of box or structural beam with or without an
end plate. Ohio Gratings, 800-321-9800 www.ohiogratings.com.
Standard features include a redesigned endframe for improved dust stop access, a two-piece water cooled rotor
end plate improving heat transfer for the process and better control of dust stop temperature, hydraulic cylinder direct dust stops that are said to yield improved sealing performance, a wide drop door for improved batch discharge, a Keel weight for increased productivity and improved distributive mixing, a hydraulic power unit with iRAM (intelligent RAM control), increased net chamber volume for higher throughput, and more.
Table 1.--Effect of an
end plate on checking of Douglas-fir crossarms as determined by frequency of checks and width of the widest check over 13 wet-dry cycles.